fbpx
, ,

APC Power-Saving Back-UPS Pro 1500, 1500VA, 230V, LCD, 6 Schuko CEE 7 outlets

QAR 1,099

Availability:

Out of stock


  • Adjustable voltage sensitivity
  • Adjustable voltage-transfer points
  • Audible alarms
  • Automatic self-test
  • Automatic Voltage Regulation (AVR)
  • Battery failure notification
  • Battery replacement without tools
  • Adjustable voltage sensitivity
  • Adjustable voltage-transfer points
  • Audible alarms
  • Automatic self-test
  • Automatic Voltage Regulation (AVR)
  • Battery failure notification
  • Battery replacement without tools

QAR 1,099

Out of stock

Order now & Get it delivered Today!!

Output
Max Configurable Power (Watts) 865 Watts / 1.5kVA
Output Frequency (sync to mains) 50/60 Hz +/- 1 Hz Sync to mains, 50/60 Hz +/- 1 Hz Unsynchronised
Topology Line interactive
Waveform type Stepped approximation to a sinewave
Transfer Time 10 ms typical : 12 ms maximum
Input
Input frequency 50 Hz +/- 1 Hz, 60 Hz +/- 1 Hz
Input voltage range for main operations 156 – 300 Adjustable, 176 – 294V
Batteries & Runtime
Typical recharge time 8hour(s)
Nominal Battery Voltage 24 V
Replacement Battery APCRBC124
Expected Battery Life (years) 3 – 5
RBC Quantity 1
Battery Charge Power (Watts) 23 Watts
Communications & Management
Interface Port(s) Optional Simple Signalling RS232 cable, USB
Control panel Multifunction LCD status and control console
Surge Protection and Filtering
Surge energy rating 441Joules
Data Line Protection RJ11 modem/fax/DSL protection (two wire single line), RJ45 modem/fax/DSL protection (four wire dual line)
Physical Maximum Height

301MM, 30.1CM

Maximum Width

112MM, 11.2CM

Maximum Depth

382MM, 38.2CM

Net Weight

13.0KG

  • Adjustable voltage sensitivity
    Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points
    Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Audible alarms
    Provides notification of changing utility power and UPS power conditions
  • Automatic self-test
    Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Automatic Voltage Regulation (AVR)
    Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
  • Battery failure notification
    Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Battery replacement without tools
    Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
  • Battery-protected and surge-only outlets
    Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
  • Boost and Trim Automatic Voltage Regulation (AVR)
    Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Building Wiring Fault Indicator
    This LED informs users of potentially dangerous wiring problems in the wall circuit.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Dataline surge protection
    Provides protection of connected equipment from power surges on the data lines.
  • Disconnected battery notification
    Warns when a battery is not available to provide backup power.
  • Extendable Run Time
    Meet long run-time needs.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Hot-swappable batteries
    Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management
    Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • LCD display
    Provides schematic overview of critical data for guided operation and troubleshooting on color LCD touch-screen.
  • LCD graphics display
    Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Power-saving outlets
    Automatically cuts power to idle equipment to conserve electricity.
  • Resettable circuit breaker
    Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Safety-agency approved
    The UPS is UL1778 Listed
  • Serial connectivity
    Provides management of the UPS via a serial port.
  • Telephone dataline surge protection
    Provides protection of connected equipment from power surges traveling on telephone lines.
  • Transformer-block spaced outlets
    Protect equipment with input transformer blocks without blocking access to other receptacles.
  • USB connectivity
    Provides management of the UPS via a USB port (not available on all models).
  • User-replaceable batteries
    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Reviews

There are no reviews yet.

Be the first to review “APC Power-Saving Back-UPS Pro 1500, 1500VA, 230V, LCD, 6 Schuko CEE 7 outlets”

Your email address will not be published.