|Total Connectors||1 x 20+4-Pin ATX Motherboard
2 x 4+4-Pin EPS CPU
6 x 6+2-Pin PCIe
8 x 15-Pin SATA
6 x 4-Pin Peripheral / Molex
|ATX Connector Distance||24″ / 610 mm|
|EPS Connector Distances||39.4″ / 1000 mm|
|Total Wattage||850 W|
|Number of +12 V Rails||1|
|Combined Power for +12 V||840 W|
|Max Load for +12 V||70 A|
|Combined Power for +3.3/+5 V||100 W|
|Max Load for +3.3 V||20 A|
|Max Load for +5 V||20 A|
|Max Power for +5 Vsb||15 W|
|Max Load for +5 Vsb||3 A|
|Max Power for -12 V||3.6 W|
|Max Load for -12 V||0.3 A|
|AC Input Power||100 to 240 VAC, 50 / 60 Hz|
|Efficiency Rating||80 PLUS Gold|
|Fan Size||135 mm|
|Protection||Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection|
|Certifications||RoHS, as per Manufacturer|
|Dimensions||0.63 x 0.34 x 0.59″ / 16 x 8.6 x 15 mm|
|Weight||0 lb / 1.83 g|
ASUS Republic of Gamers ROG Strix 850G 850W 80 PLUS Gold Modular Power Supply (White)
Out of stock
Out of stock
Send me an Email when the product is back in stock:
Keep components powered with the quiet Republic of Gamers Strix 850G 850W 80 PLUS Gold Modular Power Supply in white from ASUS. Featuring a single +12V rail, this 850W ATX power supply provides one motherboard, two CPU, six PCIe, eight SATA, and six 4-pin peripheral connectors. Certified 80 PLUS Gold, the ROG Strix 850G is also capable of 0dB operation at below 40% TDP. All cables are fully modular, and the motherboard, CPU, and PCIe cables all feature embedded capacitors to reduce voltage ripple. In addition to a motherboard, two CPU, three PCIe, two SATA and two 4-pin cables, and a power cable, this PSU also comes with two ROG badges, a logo magnet, and three ROG labels for customizing its look.
The integrated ROG heatsinks are designed to provide lower temperatures inside the PSU, while also expandiog the lifespan of components and allowing for higher-range 0dB operation.
Axial-Tech Fan Design
Axial-tech fan design features a smaller fan hub, longer blades, and a barrier ring that increases downward air pressure. This allows the 135mm fan to keep things cool at low RPMs while producing less noise.
Dual Ball Fan Bearings
This PSU uses a dual ball bearing setup, intended to last up to twice as long as a sleeve bearing design.
An onboard controller brings the 135mm fan to a standstill when thermal design power, or TDP, is below 40%, facilitating light gaming in relative silence. Above 40% TDP, the fans automatically start up again.
White Edition Design
White components can easily achieve a clean aesthetic or adopt ambient RGB colors for greater customization than their darker or painted counterparts. With a white case, modular cables, stickers, and magnets, this white edition PSU is a perfect fit for any white gaming rig.