No products in the cart.
Computers & Laptops, Memory (RAM), PC Components
Desktop RAM-8GB DDR3 PC3-12800 Kingston
Availability:
Out of stock
- One 8GB module of 1600MHz DDR3 Memory
- Specifically designed and tested for compatibility in various devices
- 240 Pin Unbuffered DIMM
- From the industry leader in PC Memory
QAR 289
Out of stock
Order now & Get it delivered Today!!
| Brand Name | Kingston Technology |
| Series | KVR16N11/8 |
| Item model number | KVR16N11/8 |
| Item Weight | 0.32 ounces |
| Product Dimensions | 13 x 0.1 x 5.2 inches |
| Item Dimensions L x W x H | 13 x 0.1 x 5.25 inches |
| Computer Memory Type | DDR3 SDRAM |
| Voltage | 1.5 volts |
| RAM | 8 GB DDR3 1600 |
| Memory Speed | 1600 MHz |
Kingston is the industry leader in PC memory. Designed with the whitebox user and system integrator in mind, Kingston Value RAM products are engineered to meet industry standard specifications and rigorously tested to ensure quality. Kingston Value RAM is ideal for those who purchase memory by spec and are looking for competitively priced generic memory that is 100 percent tested to meet industry specifications. Included in the package is one 8 GB module of 1600MHz DDR3 memory. Specs are standard 1G X 64 Non ECC 1600MHz 240 Pin Unbuffered DIMM (DDR3, 1.5V, CL11, FBGA, Gold).
This document describes ValueRAM’s 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.
• JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal banks
• Programmable CAS latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write (either on the fly using A12 or
MRS)
• Bi-directional Differential Data Strobe
• Internal (self) calibration: Internal self calibration through ZQ
pin (RZQ: 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°Cº
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal banks
• Programmable CAS latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write (either on the fly using A12 or
MRS)
• Bi-directional Differential Data Strobe
• Internal (self) calibration: Internal self calibration through ZQ
pin (RZQ: 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°Cº
• Asynchronous Reset
• PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)
Add a review
You must be logged in to post a review Log In
Reviews
There are no reviews yet