|Mobile module||4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps|
|Status||Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received|
|Bridge||Direct connection (bridge) between mobile ISP and device on LAN|
|Passthrough||Router assigns its mobile WAN IP address to another device on LAN|
|SMS||SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP|
|Black/White list||Operator black/white list|
|Multiple PDN (optional)||Possibility to use different PDNs for multiple network access and services|
|Band management||Band lock, Used band status display|
|Wireless mode||IEEE 802.11b/g/n, Access Point (AP), Station (STA)|
|WiFi||WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter|
|WiFi security||WPA2-Enterprise – PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation|
|SSID||SSID stealth mode and access control based on MAC address|
|WiFi users||Up to 50 simultaneous connections|
|Wireless Hotspot||Captive portal (Hotspot), internal/external Radius server, built in customizable landing page|
|WAN||1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX|
|LAN||1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX|
|Routing||Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)|
|Network protocols||TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL)|
|VoIP passthrough support||H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets|
|Connection monitoring||Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection|
|Firewall||Port forward, traffic rules, custom rules|
|DHCP||Static and dynamic IP allocation, DHCP Relayd|
|QoS / Smart Queue Management (SQM)||Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e|
|DDNS||Supported >25 service providers, others can be configured manually|
|Network backup||VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover|
|Load balancing||Balance your internet traffic over multiple WAN connections|
|NetSnapper (optional)||Mobile connection management, data compression VPN client (not available in standard FW)|
|SSHFS (optional)||Possibility to mount remote file system via SSH protocol (not available in standard FW)|
|Authentication||Pre-shared key, digital certificates, X.509 certificates|
|Firewall||Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T|
|Attack prevention||DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)|
|WiFi security||WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation|
|VLAN||Tag based VLAN separation|
|Mobile quota control||Set up custom data limits for the SIM card|
|WEB filter||Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only|
|Access control||Flexible access control of TCP, UDP, ICMP packets, MAC address filter|
|OpenVPN||Multiple clients and server can be running simultaneously, 12 encryption methods|
|OpenVPN Encryption||DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC|
|IPsec||IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)|
|PPTP, L2TP||Client/Server services can run simultaneously|
|Stunnel||Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code|
|SSTP||SSTP client instance support|
RUT240 is an all-time bestseller industrial 4G LTE Wi-Fi router for professional M2M & IoT applications.
It delivers high performance for mission-critical cellular communication in rigorous environments.
RUT240 is widely used for 4G backup, Remote Connection, Advanced VPN, and tunneling services in IoT networking solutions.
- RUT240 is an all-time bestseller industrial 4G LTE Wi-Fi router for professional M2M & IoT applications.
- It delivers high performance for mission-critical cellular communication in rigorous environments.
- RUT240 is widely used for 4G backup, Remote Connection, Advanced VPN, and tunneling services in IoT networking solutions.
- WAN failover ensures automatic switch to alternative backup connection in case of any connectivity issues.
- The Wi-Fi is functional in both: Access point and Station mode at the same time.