, , ,

Yamaha R-S202 Stereo Receiver with Bluetooth (Black)


Available on backorder

SKU: R-S202 BL
Categories: , , ,

  • Up to 100W Per Channel at 8 Ohms
  • 4 x RCA-In, 1 x RCA-Out
  • Built-In Bluetooth Connectivity
  • Front Panel 1/4″ Headphone Output

QAR 999

Available on backorder

Order By Whatsapp Order By Call

Order now & Get it delivered Today!!

Power Output per Channel100 W at 8 Ohms / 40 Hz to 20 kHz / 0.2% THD
115 W at 4 Ohms / 1 kHz / 0.7% THD
140 W at 8 Ohms / 1 kHz / 10% THD
Dynamic Power per Channel125 W at 8 Ohms
150 W at 6 Ohms
165 W at 4 Ohms
180 W at 2 Ohms
Frequency Response20 Hz to 20 kHz ±0.5 dB
Speaker Impedance8 Ohms
Auro 3D SupportNo
Rear A/V Inputs4 x Stereo RCA
Rear A/V Outputs1 x Stereo RCA
Front I/O1 x 1/4″ / 6.35 mm Headphone Output
Other Rear I/O1 x AM Antenna Terminal
1 x FM Antenna Terminal
Speaker Connectors4 x Spring Clip Pairs
A/B Speaker SelectionYes
Bluetooth ProfilesA2DP, AVRCP
Supported Audio CodecsAAC, SBC
Number of Tuner Presets40 Stations
SensitivityFM Mono at 50 dB: 3 µV / 20.8 dBf
Power ConsumptionStandby: 0.5 W
Dimensions (W x H x D)17.1 x 5.0 x 12.3″ / 43.4 x 12.7 x 31.2 cm
Weight14.8 lb / 6.7 kg

Optimized for stereo sound with simple connectivity, the black Yamaha R-S202 Stereo Receiver features four stereo RCA inputs, one stereo RCA output for recording to an external device like a CD recorder, and a 1/4″ headphone output. Its only other wired connections are the speaker outputs, which will allow you to set up two pairs of speakers in an A/B configuration. This will enable you to have either pair active, or both pairs active at the same time. It has Bluetooth built in for wireless streaming from smartphones, tablets, and more. The receiver outputs up to 100W per channel at 8 Ohms and includes an IR remote control

100W Per Channel Output Power, Optimized Circuit Design
Along with two 100W (8 Ohm, 40 Hz to 20 kHz, 0.2% THD) channels, the R-S201 Receiver offers a design that minimizes the length of signal routes and optimizes the circuit layout. Positioning the power transformer near the power amplifier circuit reduces power loss while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground are connected at one point, eliminating mutual interference to achieve a higher S/N ratio. The result is sound with enhanced clarity.
Bluetooth Streaming Music Services
The R-S202 provides Bluetooth functionality to let you enjoy streaming music from smartphones and other devices. Use your device to select the songs from your library and enjoy.
40-Station AM/FM Preset Tuning
You can store a total of up to 40 AM and FM stations, then select the station from either the receiver or the remote control. The Auto Preset feature lets you automatically search for and store FM stations within range. Frequencies appear on the display, so even when you want to listen to a new station, you can easily tune to its frequency.
Natural Sound Reproduction
The R-S201 Receiver is based on the concept of Natural Sound for reproducing music as it originally sounded.
Power Saving
A power management function automatically switches to standby mode when the receiver has not been operated for a long time. It can be set to 2, 4, 8, or 12 hours, or turned off. In addition, the receiver consumes 0.5W in standby mode, offering energy-saving performance.
Speaker Selector and Speaker Terminals for 2 Systems
Equipped with speaker terminals for 2 systems, the built-in speaker selector makes it easy to switch between speaker outputs, allowing you to hear the sound from one speaker system (A or B) or from both (A and B).
Simple Design
The R-S201 Receiver features a simple design with minimal connections, buttons, and knobs.
Additional Features
  • Simplified remote control layout
  • Headphone terminal
SKU: R-S202 BL Categories: , , ,


There are no reviews yet

Add a review
You must be logged in to post a review Log In